Best Way To Fix LG DVD Player Surround Sound Issues

If you are getting lg DVD Player Surround Sound troubleshooting message on your PC, check out these troubleshooting ideas.

Updated

  • 1. Download and install ASR Pro
  • 2. Launch the program and select your language
  • 3. Follow the on-screen instructions to start a scan of your computer for errors
  • Click here to get a complimentary download that will help you clean up your PC.

    How do I reset my LG surround sound system?

    press the HOME button on the remote control, selecting “Settings” > “OTHER” “Initialize”, then press ENTER or WHEEL. der.Select the option you want to close it when you’re done. Factory Reset – You can reset the dice player to its original factory settings.

    Element ID: 00007222 / Last modified: 02 /03/2022

    lg dvd player surround sound troubleshooting

    Follow these general steps to resolve this issue when our Blu-ray Disc™ player uses an HDMI® cable connected to your TV . Refer to the product manual if the steps require model-specific information. onerror=”manuals_variable(this)”

    1. Make sure your TV is connected to the correct HDMI input.
      • Set this TV to the correct input.
      • Set your speaker output to AV AMP if you have a TVOr BRAVIA™.you
    2. If you are using an HDMI to DVI cable or adapter, you will need to connect a digital (optical or coaxial) or analog red and white TV to your devices in order to receive their audio signal.
      • dvi only supports video format signals.
      • The audio input, available on all TVs, determines which cable to use.
    3. If you are playing an MPEG2 (PS) program stream file, and turn off the Blu-ray disc player at this point. Normally
      • this fixes problems with playing MPEG2 PS files.
    4. The HDMI cable may be defective. Try another one.
    5. Set your Blu-ray player to digital or (hdmi) to PCM audio output.
      • This applies if you have connected the accessory to one Blu-ray Disc player or one TV using an HDMI cable.
      • Change this setting to see if the amplifier is producing sound.Li>
    6. If
    7. the built-in audio of the Blu-ray Home Show System is working, do not check if there is sound from the rear speakers or if you hear 5.Surround sound through 1 Dolby Technologies Digital® on your TV .
    8. If the volume is very.low, .select .Audio .DRC, .BD, .possibly .Audio .Mix .on the .Blu-ray .disc player .and ..
    9. Turn on the BD-Audio Mix setting Set up the player Blu-ray -ray to On, there may be no sound after the presentation starts.